Content-type: text/html OkOb Web Forum - Print Page 

    

      

        OkOb Web Forum
        (https://www.okob.net/yabb/YaBB.cgi)
      

        3D Printing >> 3D Printing and RepRap X2 Discussion >>  M322 command
        
(Message started by: samo on Jun 15th, 2016, 6:34am)
Title: M322 command
Post by samo on Jun 15th, 2016, 6:34am
Hi ,
As i undrestood with M322 command can active  following mode ,
How about mirror mode ? . when T0 is active and Command M322 T1 S1
It will make following mode active, how mirror mode working ? becuz when i send for T0 move 10mm to center of bed T1 going out of bed 10mm ! , i think for T0 moving 10mm inside the bed T1 also need to moving 10mm inside the bed right ?

Please if you can send your configuration.h and adv_configuration.h file of your printer setting
Title: Re: M322 command
Post by Denis Bakin on Jun 15th, 2016, 10:45am
You need to turn on the reverse mode:
M322 T1 S1 R1

The M322 command options are described here:
http://www.okob.net/projects/reprap_x2v3/firmware.htm

(scroll down to <M322 the "follow me" mode command>).
Title: Re: M322 command
Post by samo on Jun 15th, 2016, 11:56am
Thank you

on 06/15/16 at 10:45:36, Denis Bakin wrote:
You need to turn on the reverse mode:
M322 T1 S1 R1

The M322 command options are described here:
http://www.okob.net/projects/reprap_x2v3/firmware.htm

(scroll down to <M322 the "follow me" mode command>).


OkOb Web Forum » Powered by YaBB 1 Gold - SP 1.1!
YaBB © 2000-2003. All Rights Reserved.