Author |
Topic: X2SW v1.1.0.6 host software bundle is released (Read 4333 times) |
|
Denis Bakin
YaBB Administrator
Gender: 
Posts: 163
|
 |
X2SW v1.1.0.6 host software bundle is released
« on: Jan 19th, 2013, 4:53pm » |
 Quote  Modify
|
The new v1.1.0.6 (beta 6) of the host software toolchain is available for download.
X2SW Wiki and download pages: http://github.com/dob71/x2swn/wiki
Changes:
------------
- Upgraded the Slic3r code to v0.9.7;
- Added RepRap X2 printer flavor to Slic3r's printer types menu (selecting it disables the feature moving nozzle sideways when retracting and uses E axis coordinate reset after a custom start script only if the script itself didn't set the coordinate);
- Added option to use custom script for extruder change;
- Made modifications to strip comments from custom script G-code and a few other lines where it was printed without checking the "verbose" output option;
- Moved the bridge flow rate option to filament section and allowed it to be set per extruder/filament type used;
- Added bridge spacing multiplier option (to prevent nozzle from dragging already laid down bridge filament strings while laying down the new ones), also can be set for specific filament type/extruder;
- Fixed a bug in the code loading GUI config in the command line mode. The command line mode was only loading the default filament INI file even if a different filament was configured for the second extruder in the GUI.
- Fixed more Pronterface bugs with properly resetting the software state and warning the user if operations disrupting the printing were initiated.
- Fixed bugs with Pronterface fonts rendering under Ubuntu 12.04 (should now work out of the box for both 32 and 64 bit).
- Added generic profiles for printing on RepRap X2 with Slic3r at 0.1mm, 0.2mm, 0.3mm layer height both PLA and ABS, single and dual extruder;
- Added generic profile for typical 0.5mm nozzle/3mm filament Mendel (Prusa, Max and/or single headed X2, etc.). The slicing with Slic3r (0.1, 0.2 or 0.3mm layer height) or Skeinforge (0.2 or 0.3mm layer height) is available.
|
| « Last Edit: Jan 19th, 2013, 5:11pm by Denis Bakin » |
 IP Logged |
---------------------------
Denis Bakin
|
|
|
Denis Bakin
YaBB Administrator
Gender:
Posts: 163
|
|
Re: X2SW v1.1.0.6 host software bundle is released
« Reply #1 on: Jan 21st, 2013, 6:01pm » |
Quote Modify
|
Note: An incorrect build of the Linux binary bundle was uploaded on 1/19/2013. If you downloaded the Linux version of the bundle prior to the time of this post (i.e. end of day 1/21/2013), please re-download.
|
|
IP Logged |
---------------------------
Denis Bakin
|
|
|
|
Home
Help
Search
Members
Login
Register
Reply
Notify of replies
Send Topic
Print